2 Stations Luggage Multi-road Condition Test Machine
This advanced luggage testing equipment simulates real-world road conditions to evaluate the durability and performance of luggage wheels, axles, frames, and overall construction quality.
Product Overview
The Luggage Multi-road Condition Test Machine features dual test stations with cement test rolls measuring 216±2mm in diameter. Each roll surface includes raised steel bars with 30mm convex width and 3mm surface thickness. The testing system accommodates samples with maximum parallel wheel spacing up to approximately 600mm.
Key Applications
Designed for R&D teams and quality control personnel to assess luggage performance during walking simulations. The machine conducts continuous walking tests to evaluate wheel, axle, wheel frame, tie rod, and box quality while calculating wheel wear rates.
Technical Specifications
Control System: PLC controlled with human-machine interface operation
Test Distance: Programmable test kilometers with customizable settings
Intermittent Timing: Configurable rest periods with power failure memory function
Operating Speed: 0-4 km/h adjustable
Fixed Gantry: Supports two-wheel and four-wheel testing modes
Power System: Precision variable frequency motor
Machine Dimensions: 1.88M × 1.8M × 1.64M (Width × Depth × Height)
Power Supply: 220V 50HZ
Road Surface Simulation
Comprehensive Pavement Testing: 30% fine cement pavement, 30% coarse cement pavement, 20% masonry pavement, 9% marble pavement, 9% blind road, 1% speed bump, 1% sewer simulation
Testing Procedure
- Position sample on test machine with wheels placed on test rolls
- Extend pull rod fully and secure on hook
- For samples without pull rods, secure using handles or side handles at 45°±2° angle to horizontal plane
- Lock lever handle and fix stopper position
- For four-wheel samples, adjust distance between test rolls to accommodate all wheels
- Set operating speed to 4km/h with 10-minute intervals every 2km of operation
- Standard test itineraries: 4km, 8km, 12km, 16km, 20km or custom distances
Critical Components
| Component |
Specification |
| Cement Rollers |
φ (216±2) mm dual rollers with adjustable spacing and opposite rotation |
| Thrusting Steel Bars |
600 × 30 × 3mm (Width × Depth × Height) |
| Fixed Gantry Angle |
45°±2° from horizontal plane |
| Test Speed & Intervals |
4km/h operation with 10-minute rest every 2km |
| Timer Display |
LCD digital display |
| Control System |
Adjustable speed, programmable total stroke, configurable rest periods with memory function |
| Limiting Device |
Adjustable positioning to maintain consistent sample placement throughout testing |
